$16.00
- Crank Extractor
- Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal.
- Patented interchangeable adaptor fits both square & hollow axles.
$8.50
Patch Kit w/18 patches, 3 tire levers, 10ml adhesive, 8cm valve hose and sandpaper
$7.99
Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.
$199.99
Designed for riders and home mechanics, it is an ideal and durable tool set.
1-Freewheel turner
1-15mm pedal wrench
1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin
1-Spoke wrench for 0.127" nipple (black)
1-Spoke wrench for 0.130" nipple (green)
1-Spoke wrench for 0.136" nipple (red)
1-Mavic® spoke wrench (yellow)
2-Phillips 2, Slotted 6 screwdriver
3-Tire levers
9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25
$34.99
- 4-in-1 cable cutter
- Cuts cables and housing
- Crimps cable ends
- Crimps housing end caps
- Housing end reformer in the handle TB-4575
$18.84
Cable plier, with a thumb lock to hold the cable tight for one-hand operation.
$30.00
- Press-Fit Bearing Removal Tool
- For internal diameter 24mm to 30mm bottom bracket bearings
$24.99
- Thru-axle adaptor for TB-WS10 Professional Race Workstand - Works with 15mm and 20mm front forks
$10.00
- Hex Key Wrench Set
- Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end
$13.00 - $18.00
- For installation and removal of 20t splined Shimano/ISIS bottom brackets
- To be used with 1/2" driver
$54.99
• Use to install dust seals for Bluto and RS1 forks
• See Service Manual for instruction
$11.99
Removes 4-notch BMX & single and single-speed freewheels.
Use with 24mm wrench.
$7.99
TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.
$11.00
- Gel contains non-Abrasive plastic beads that provide increased surface friction
- Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc)
- Prevents corrosion/scuffing and quiets creaking noises
- Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired
- Always follow the manufacturer's torque specifications when clamping carbon parts
$56.00
- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane creek, TH/FSA)
- Includes inside gauges for headtubes and cups and outside gauges for bearings
Page 1 of 2
Next page