$7.99
Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.
$199.99
Designed for riders and home mechanics, it is an ideal and durable tool set.
1-Freewheel turner
1-15mm pedal wrench
1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin
1-Spoke wrench for 0.127" nipple (black)
1-Spoke wrench for 0.130" nipple (green)
1-Spoke wrench for 0.136" nipple (red)
1-Mavic® spoke wrench (yellow)
2-Phillips 2, Slotted 6 screwdriver
3-Tire levers
9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25
$7.99
TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.
$9.99
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws
TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses
TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses
TB-1904: 10mm x 1.0, for derailleur hanger
$11.99
Removes 4-notch BMX & single and single-speed freewheels.
Use with 24mm wrench.
$34.99
- 4-in-1 cable cutter
- Cuts cables and housing
- Crimps cable ends
- Crimps housing end caps
- Housing end reformer in the handle TB-4575
$24.99
- Thru-axle adaptor for TB-WS10 Professional Race Workstand - Works with 15mm and 20mm front forks
$54.99
• Use to install dust seals for Bluto and RS1 forks
• See Service Manual for instruction
$15.49
- Creates a ceramic coating for incredible durability and long distance performance
- Provides ultra low friction for ultimate drivetrain efficiency
- Waterproof qualities excelling in wet conditions
- 95% biodegradable
$13.00 - $18.00
- For installation and removal of 20t splined Shimano/ISIS bottom brackets
- To be used with 1/2" driver
$26.50
- Cable Cutter
- Cuts cable, housing and wire quickly and easily.
- Thumb-lock closure is easy to open and protects cutter when closed.
$18.84
Cable plier, with a thumb lock to hold the cable tight for one-hand operation.
$12.50
- Crank Remover
- With patented interchangeable adaptor fits both square & hollow axles.
- For use with 8mm hex key wrench.
$16.00
- Crank Extractor
- Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal.
- Patented interchangeable adaptor fits both square & hollow axles.
$32.50
- Disc Brake Piston and Pad Alignment Tool
- Reposition pistons or help align disc pads with this easy to use tool.
- It's made of Cr-Mo steel with a comfortable and oversize rubber handle for a great grip.
$10.00
- Hex Key Wrench Set
- Contains 2, 2.5, 3, 4, 5, 6, and 8mm standard & 4, 5, 6mm ball end
$17.00
- Nipple Wrench for Deep Rims
- The V-spring grabs the nipple to screw on deep rims to prevent the nipple from dropping.
- With depth control function to release the nipple after 3~4 mm on the spoke.
- Also can use with 1/4" electric screwdriver.
Page 1 of 2
Next page