The Trail-Gator Spare receiver Kit Headtube Attachment is a must-have if your Trail-Gator is going to be used on multiple children's (rear) bicycles. Makes swapping between bikes a snap. - Spare seatspost attachment (for the children's bike) for the Trail-Gator tow bar - Fits all Trail-Gator models including the 640020-640022-640023 - Allows the Trail-Gator to be attached to multiple juvenile bicycles quickly - Fits headtube up to 45mm (1.75")

For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

For CubiCubi 500 / 850 / 1200 - 3.7V 6000mAh Li-ion power bank - Recharge via a micro-USB cable - Charge time (approx) : 4-6hr - Charge phone and other devices with USB charge cable - Input: Micro-USB (5V/1A) - Output: USB (5V/1A)

An ultra-bright, high-capacity USB rechargeable light providing 850 lumens of light output and five lighting levels, plus reserve for longer run times. Dual-zone refractor lens design allows clear near and far visibility focusing the main beam downward to prevent affecting pedestrians or oncoming traffic. The included and optional handlebar mounts provide placement flexibility for mounting cycle computer, RideCase, single light, dual lights, CubiCubi backup battery, GoPro Session Cameras, and more. - Size: 10.4 x 3.8 x 3.8cm / 4.1" x 1.5" x 1.5" (Light+PowerPack) - Lamp: Cree XLamp XHP50.2 - Battery: 3.7V 3000mAh Lithium Ion (integrated) - Charge / Charge Time (Approx): Micro USB / 4-6hr - Input: 5V / 1A - Output: 6V / 1A - Lamp Housing: Forged aluminum / Injection molded polymer - Mount: Handlebar (25.4 - 31.8mm) (Shim included) - Waterproof: IPX 6 - Dual zone refractor lens, Low battery indicator, optional USB charging dock - Weight: 124g / 4.37oz (Light+PowerPack) MODE / BURN TIME (APPROX) - 850 Lumens (High) / 2.1hr - 450 Lumens (Middle) / 3hr - 200 Lumens (Low) / 7.5hr - 70 Lumens (Steady) / 17hr - 70 Lumens (Blinking) / 30hr

For CubiCubi 850 Lighthead - Cartridge battery - 850 Lumens / 3000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

For CubiCubi 500 / 850 / 1200 - Charges two batteries simultaneously

Topeak's DeFender M3 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Topeak makes it easy to air up your tires with the HybridRocket RX pump. This innovative little ride-saver is a CO2 inflator on one side and a standard pump on the other. It also boasts aluminum construction for superb durability and max pump power. The HybridRocket fits Presta valves, gets up to 160psi and easily fits into a jersey pocket.

Topeak's Joe Blow Sport II quickly inflates tires thanks to its durable steel barrel and base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves as well as an oversized, padded handle. Plus, the easy-to-read gauge lets you dial in the perfect pressure every time!

Topeak's RX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and road grime.

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap

• Aero design rear rack for road bikes without seatstay rack mounts • Adjustable struts fit various seatstays • Installs and removes easily with center bolt clip and seatstay straps • RX QuickTrack™ system is compatible with RX TrunkBag EX • Fits road tires up to 700 x 25c

Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.

Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.

Topeak's Smartphone DryBag keeps your cellphone dry no matter the weather. It's composed of water-resistant fabric with a clear TPU window that transmits touch to the screen. A flap folds over the window to prevent water penetration. Plus, it sports vibration-damping foam and Topeak's QuickClick mount that allows you to quickly attach it to your handlebar or stem. The DryBag is a safe-haven for your tech-tools.

Sport Camera Multi-Mount with quick release for mounting GoPro Hero series, Sony Action Cam series, Shimano Sport Camera, and Garmin VIRB X / XE on helmet, handlebar or saddle rails. Features angle adjustment for tilt and can be oriented for landscape or portrait modes. - Added Feature: Angle adjustment landscape or portrait orientation - Brackets: For Handlebar (fits 22.2 & 31.8mm) / Helmet / Saddle rails - Material: Engineering grade plastic - Max Load: Sport camera 200 g / 7.04 oz - Modular Multi-Mount Device: Adapters included for GoPro/Shimano Sport Camera/Garmin VIRB X/XE and Sony Action Cam

QuickClick mount for spring-style saddles. Works with all Topeak Wedge Bags. - Material: Injected nylon / Stainless steel - Weight: 50g / 1.76oz

The Deva has proven its worth during the cycling classics over cobblestones. Its material and unique cylindrical shape ensure perfect clamping and prevent the bottle slowly working its way up. The cage is designed so that the bottle can be inserted easily and smoothly. And since it's produced in so many different colors, there is one available for everyone's bike.

The Radar is a side load bottle cage with very good clamping, specifically designed to fit small bike frames. You insert and remove the bottle sideways from either side, depending on how you mount the cage. The body of the Radar is made from a strong glass fiber compound. Tacx increased its clamping force even further by giving it a round shape with extra ribs.

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt

Designed for riders and home mechanics, it is an ideal and durable tool set. 1-Freewheel turner 1-15mm pedal wrench 1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin 1-Spoke wrench for 0.127" nipple (black) 1-Spoke wrench for 0.130" nipple (green) 1-Spoke wrench for 0.136" nipple (red) 1-Mavic® spoke wrench (yellow) 2-Phillips 2, Slotted 6 screwdriver 3-Tire levers 9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25

8" pliers with a long nose.

For 3.2, 3.3, 3.5, and 4.0mm nipples.

TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.

TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger

Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.

Remove BB30 Bearings

Set of 2 tire levers.

- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps - Housing end reformer in the handle TB-4575

- For use with Shimano SM-BB9000 and SM-BB93 outboard BBs

- Thru-axle adaptor for TB-WS10 Professional Race Workstand - Works with 15mm and 20mm front forks

T-Shaped wrench with Torx 30/5mm hex

• Wall-mount bike rack • Powder-coated finish • Vinyl-coated arms • Holds one bike by the top tube • Folding

Designed to provide hundreds of hours of indoor cycling comfort, the contemporary short-nose saddle shape with ergonomic cutout reduces pressure on sensitive areas. Ride-tuned MCU foam density provides the optimal amount of padding—not too soft, not too firm. - Traditional CrMo rail design - Seat Mast not included

Have another rider in your household who prefers a different saddle? Grab a second seat mast and swap them out in seconds between rides. With 335mm of height adjustment, 80mm of fore/aft adjustment and permanent laser-etched scales, it's quick and easy to dial in your precise fit every time. - Universal saddle clamp works with most saddle rail designs - Saddle not included

Replacement Part – Aero Headlight Bracket - Works For Both Headlights & Tail Lights - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars - Fits All Serfas Headlights Except: USL-200 & USL-450

Cell Phone Top Tube Bag - Replaceable Cover (Lt-Stm4Rt) - Large Secondary Pocket - Secure Three Strap Design - Touch Screen Capable Replacement Cover - Cell Phone Cover Will Fit Up To Iphone 6+™ - Size: 7” X 4” X 3.75” - 105 Cubic Inches

Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included

Replacement/Spare Part – UNI-GO2 GoPro Adapter Bracket Allows mounting of Serfas headlights to GoPro action camera mount systems (e.g. helmet mount, handlebar mount, etc.) - Compatible with all current E-Lume and late model True Series headlights

The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head comes with two 16 gram threaded cartridges and a sweet little foam cartridge cover that protects from cold cartridges while in use. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits all threaded CO2 cartridge sizes - Alloy mini head with threaded spring push design - Includes two 16g CO2 cartridges - Includes one reusable foam cartridge cover to fit 12g or 16g cartridges

3-IN-1 Handlebar Mounted Accessory Holder: 3-IN-1 Design: - Headlights - Action Cameras (GoPro) - Garmin Computers (Compatible w/ Garmin Only) - Adjustable Angle (100 Degree Tilt Up/Down) - Materials: Aluminum Alloy, Nylon - Simple Installation Specs: - Length: 105mm - Width: 68mm - Height: 57mm - Weight: 76g - Snap Ring Fitment: 31.8-32mm Bars - Max Load: 400g

Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

• Use to install dust seals for Bluto and RS1 forks • See Service Manual for instruction

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

The OTTO Mount is an accessory for on-the-bike carry of OTTOLOCK. It's made of flexible silicone and has four ladder-strap hooks to ensure a snug, secure fit for multiple places on your bike. Note: Make sure all four hooks are engaged with your OTTO Mount ladder strap, and you position the OTTOLOCK head weight near the clamp to ensure you do not lose your OTTOLOCK. - Recommended for the 18" OTTOLOCK only - Flexible inner fit-up diameter accommodates 1 – 2" (25 – 51cm) round bicycle tubes - Material: silicone

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Bullet offers excellent rear light projection and daytime visibility with Optimal VIZ. Keep tabs on battery life with the integrated low power indicator. - 200-lumen output - Group Ride Mode—be seen without distracting fellow cyclists - Varying steady and safety flash modes - USB rechargeable - FL1 Standard IP64 Water Resistant

The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

The NiteRider Omega 300 Seat Post Straps install quickly and easily with the loop around and hook design. - Compatibility: Omega 300 Tail Light only - Fits 27.2mm seat posts

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems